Introducing the 2019 Kerrville Triathlon Festival Finisher Medals!

Get excited! We are about three months away from this year’s Kerrville Tri through the scenic Texas Hill Country. Taking place on September 28th & 29th, get ready for your swim-bike-run adventure packed full of fun. Watch the video below to get the first look at the finisher medal, that doubles as a sweet belt buckle.

Give yourself the motivation you need to keep training by seeing what awaits you at the Kerrville Tri finish line!

Use this milestone mileage checklist to keep your bike riding like new

Did you just buy a new bike? Perhaps you just had a complete bike tune-up before you began training for Kerrville Triathlon. Maybe you had some parts replaced during the offseason. Whatever state your bike is in, you want your trustworthy ride to last as long as possible! Adhere to this milestone mileage checklist and follow the mileage timeline. Pro tip: click the checklist below, download the PDF, and keep it handy at all times!

No matter the distance, you should check the tire pressure in your #bike's tires before every ride! Click To Tweet

Don’t let your bike fall into disrepair

100 miles

  • lube chain
  • check tire pressure (Pro tip: do this before each ride)

500 miles

  • wash and clean like a pro
  • lube cables
  • check wheels for true and roundness

1,000 miles

1,500 miles

  • check cassettes and chainrings for wear
  • check bearings for smoothness
  • change cables and housings

3,000 miles

  • change cassette
  • overhaul bearings



Use these motivational quotes during your Kerrville Tri training

The mental aspect of training for Kerrville Triathlon is just as vital as the physical.

You can cycle all the miles, swim all the laps, and complete all the brick workouts. But if you don’t prepare between your ears you’re not fully prepared. This is where motivational quotes can be quite helpful.

Many people use quotes or short sayings to keep themselves going when it gets tough. They place these messages where they’ll see them most, mirror, gym bag, refrigerator, locker, etc. Sayings are memorized and repeated when needed most during a tough portion of training. Click below to sharpen your mental preparation with four of our favorite motivational quotes!

These can push you through a difficult time, just when you need it most. When you come out on the other end, you’ll be that much more prepared for Kerrville Tri on Sept. 28-29!

Why you should use fins

Do you want to improve your kick strength, ankle flexibility, body position, and increase your speed in the water? Of course you do. Use fins during some of your swimming workouts!  With the right amount of training and overall improvement, you’ll improve your Kerrville Tri swim in Nimitz Lake.

Wearing swim fins increases the amount of resistance your muscles experience as you kick, guaranteeing you’ll put your leg muscles to full use. Stronger legs and the additional strength will carry over into normal swimming when you’re not wearing your fins.

Another benefit of using fins is improved ankle flexibility. This stems from the extra force the fins place on your ankles as you kick. Increased ankle flexibility will result in a more efficient flutter kick through better angles of attack in the water. When you are unable to fully flex your ankles into a streamlined position the ankles remain somewhat bent, catching water instead of propelling the body through it.

Do you have some other new swim equipment? This Rookie Tri blog shows you how to incorporate other swim equipment to your triathlon training.

Technique-focused workout

You’ll want to focus on a slow-motion, over-exaggerated flutter kick. During this workout, focus on slowing down the kick cycle and dramatically increase your range of motion. The over-exaggerated technique allows swimmers to more easily tune into ankle flexion and proper body alignment throughout the kick. As a bonus, this drill is also quite taxing on the legs and core – the increased workload of a large kick also makes for a great strength-building exercise.

2 Rounds

2 x 25 over-exaggerated flutter kick (with kickboard)

4 x 25 freestyle, easy

2 x 25 over-exaggerated flutter kick (no kickboard)

4 x 25 freestyle, mid-level effort

2 x 25 over-exaggerated flutter kick (with kickboard)

4 x 25 freestyle, easy

Learn about TPI and make sure your bike has the tires you need

Curious about TPI? So are a lot of other cyclists and triathletes. In short, TPI stands for Threads per Inch. Take the time to learn about TPI, how it can impact your ride, and what bike tires we recommend. This knowledge can be beneficial during your Kerrville Triathlon training!

Tires are made with threads. Lower-end tires have lower counts which tend to make them heavier and provide a harsher ride. Higher-end tires have higher thread counts which allow them to ride smoother and contour to bumps on the road better. On some tires, the threads are mixed in with Kevlar or some other type of durable fabric. This makes them more resilient to flats. It is important to note that a higher TPI tire is not more prone to flats than a lower TPI tire. No matter what the threads per inch is on your tires, there are steps you can take to prevent flat tires.

Threads per inch and the tires you need

Tires with lower threads per inch are less expensive and are more common for training use. Higher TPI tires are more expensive and tend to be used for racing or for riding roads where you are looking for a smoother ride.

For a great low TPI tire, we recommend the Vittoria Zaffiro Tire. For those of you looking for the high TPI tire consider the Vittoria Diamante, the Vittoria Open Corsa, the Vredestein Tricomp, or the Continental Grand Prix 4000.

Check with James Balentine at City Limit Cycles to see if these tires are still good options.

Follow these derailleur adjustment tips to eliminate shifting issues

Experiencing issues shifting as you begin training for Kerrville Triathlon Festival on Sept. 28-29? Try your hand at a derailleur adjustment with these simple steps.

Derailleur designers provide a simple way for you to dial in shifting. You don’t even need tools (although, it’s easiest to make and check adjustments when the bicycle is supported in a repair stand). Keep in mind, these steps are for derailleurs that are not damaged or bent. If you suspect that it is, it needs more than this simple adjustment and you should call James Balentine with City Limit Cycles.

To adjust the derailleur, look at the point where the cable enters the rear derailleur. See that round, knob-like piece? That’s a barrel adjuster. It’s used to tune the derailleur adjustment.

Standing behind the bike, the barrel adjuster is turned either counter-clockwise or clockwise in half-turn increments until the shifting hesitation is cured. Which way do you turn it? It depends on what type of hesitation you’re experiencing. The most common problem is slow-shifting into easier gears (toward the spokes) due to the cable stretching. But, it’s also possible that you’re experiencing the opposite.

This rule will help you remember which way to turn it. If the derailleur is hesitating when shifting toward the spokes (the more common problem), turn the barrel toward the spokes (counter-clockwise). If it hesitates shifting away from the spokes, turn the adjuster away (clockwise) from the spokes. Turn it only a half turn, shift multiple times to check the adjustment, and repeat as needed to eliminate all hesitation.

Bike frame materials breakdown

If you’re in the market for a new bike, you might be overwhelmed with the different types of bike frame materials from which you can choose. Be prepared; know the type of bike you want and what you want it to do. When researching online or speaking with a dealer you need to be prepared with as much knowledge as possible. Comfort, weight, corrosion, and repairability are major factors to consider when searching for your next bike. Read our list of pros and cons for different bike frame materials. This will come in handy when purchasing your first bike or upgrading from your current ride!

STEEL

Pros:
•  comfortable
•  absorbs shock
•  durable
•  repairable
•  “skinny tubes” = classic looking
•  can be almost as light as titanium

Cons:
•  heavier than aluminum
•  rusts if not maintained
•  “skinny tubes” = old school

ALUMINUM

Pros:
•  can be very lightweight
•  new aluminum is more comfortable
•  resists corrosion, does not rust
•  stiff for good energy transfer

Cons:
•  the low end has a harsher ride than steel
•  not as repairable as steel

CARBON FIBER

Pros:
•  very comfortable
•  stiff for good energy transfer
•  does not rust
•  “cool factor” and aero

Cons:
•  can be expensive
•  hard to repair

TITANIUM

Pros:

•  comfortable, similar to steel
•  does not rust or corrode
•  lightweight
•  durable

Cons:
•  usually more expensive
•  difficult to repair due to the strength of the material

Registration is open for the 2019 Kerrville Triathlon Festival as of Friday, February 1st. The 9th annual Kerrville Triathlon weekend will take place September 27-29, in Kerrville, Texas. Last year, more than 1400 triathletes competed in eight different events. They included a swim course in Nimitz Lake, bike course through the Texas Hill Country, and run course along the Guadalupe River. All participants who register on Opening Day will automatically receive an additional $5 off.

“The Kerrville Triathlon continues to grow, exposing more triathletes to the Most Scenic Triathlon in Texas and the welcoming City of Kerrville,” said Stacy Keese, co-owner of High Five Events. “We look forward to another banner year while showcasing the beauty of the Texas Hill Country.”

Opening Day Best Pricing

The Opening Day Best Pricing structure for all events follows: Debra Zapata Sprint ($80), sprint aquabike ($80), sprint relay ($140), quarter ($130), quarter aquabike ($130), half ($200), half aquabike ($200), half relay ($260), kids fun run (free), Virtual Kerrville Triathlon, which can be associated with any distance ($45). After Friday, Feb. 1st, all prices will increase by $5.

Participants of the 2019 Kerrville Triathlon Festival will receive a belt buckle finisher’s medal, customized shirts, reusable custom water bottles, personalized race bibs, swim caps, a post-race meal including fajitas and tacos from H-E-B, fruit, snacks, beer and an opportunity to float in the Guadalupe River. Professional timing and photography, a great volunteer crew, hundreds of supportive spectators, and an electric finish line festival will showcase why the Kerrville Triathlon is one of the best triathlons in Texas.

The Debra Zapata Sprint distance, sprint relay, and kids fun run take place on Saturday, Sept. 29th. Quarter distance, quarter aquabike, half distance, half aquabike, and half relay will all happen on Sunday, Sept. 30th. Participants can pick up their packet at the Kerrville Triathlon Expo and Packet Pickup at the host hotel, Inn of the Hills. The expo and packet pickup, which is free and open to the public, will take place on Friday, Sept. 27th, and Saturday, Sept. 28th. Participants can see the pricing structure and register on the website.

Truing your wheels at home could save you money and get you back on the road

If you have some free time you should practice a new skill – truing a wheel!  
Before diving into the details, understand what ‘truing’ means. Often times, hitting potholes, curbs, and foreign objects can adjust your wheel, making it different than before. Truing a wheel means to shape it or adjust it exactly as it was before.

What you need:

wheel, spoke wrench, and truing stand( or your bicycle frame)

Truing a severely bent or out-of-true wheel can be more of a task or cause more problems than you are willing to deal with. However, for those small wobbles in your wheel, here are some easy tips to get you back on the road without running your brakes unsafely open.

The wheel consists of:

Truing your wheels when needed allows you to spend more time riding.
Truing your wheels when needed allows you to spend more time riding.

– hub: center of the wheel
– rim: outside of the wheel that the tire is put on
– spokes: connects the hub to the rim
– nipples: small metal pieces holding individual spokes in the rim (the nipple is the part that is tightened or loosened to adjust tension between the hub and rim)

Directions:

  1. find the place where the rim is rubbing the brake pad
  2. locate the spoke nipple that is opposite the side that is rubbing
  3. tighten that spoke nipple with a spoke wrench (Remember to only turn the spoke nipple a quarter turn at a time. To tighten a spoke, turn the nipple clockwise. To loosen the spoke, turn the nipple counter-clockwise.)
  4. always start at the worst spot and work your way from to the least out-of-true spot
  5. keep going until the wheel no longer rubs the brakes

When you’re done, clean your bike with these tips to get it ready for your next ride. Remember: truing a wheel requires tension in the spokes to be perfectly balanced. This generally takes a bit of patience and practice. If needed, call James Balentine at City Limit Cycles. He’ll visit you at home or at work and take great care of your bike.

Don’t let rust begin forming on your bike

We all know that nothing creates more of an eyesore on a bicycle than rust. The most common parts that rust are the bolts in the cockpit of the bicycle and the chain. The reason it shows up so readily on chains is that they are entirely steel (for the most part). Their low position on the bicycle exposes them to a lot of water and contaminants from the surface of the road. Cockpit bolts (securing the parts of your bike you touch while riding) can rust because of your sweat and hydration and their position under the body of the rider. While a rusted chain poses virtually no safety concern, it does make for poor shifting performance. It can also have a negative effect on the condition of your cassette. Rusty chains should be replaced at the earliest convenience. Bolts on the bar, stem, and top cap, on the other hand, can actually cause a safety risk. If any of these rusty bolts were to sheer due to weakening, it could result in a crash. Furthermore, rusty bolts up front can make for very difficult maintenance if they get stuck. This can cause you to need new components prematurely.

Measure to prevent rust

The best way to prevent rust is simply to give your bicycle a quick wash and wipe down after every ride. That can be a long training ride through the Texas Hill Country and/or your sprint/quarter/half at Kerrville Triathlon. Make sure to get any sweat, Gatorade, and Gu off your bike. Also, storing your bicycle in a dry place, preferably indoors, can go a long way toward keeping your bike rust-free. Finally, don’t forget to schedule an appointment with your favorite bike mechanic, James Balentine of City Limit Cycles, for regular service. He will inspect for rust and other problems, saving you headaches down the road!